Stainless steel tank polishing machine designed by XINYIDA Polishing Machine. Use thousand impeller or cloth wheel, hemp wheel. The beam is adjusted up and down to adjust the position of the grinding head. The beam is fixed to the left and right, the base of the equipment is travelling. The motor is placed at back of machine. The inner joint of the beam is connected, the rear end has a cylinder hinge to realize the floating, and the front part is mounted with the grinding head to polish.

• Model:XYD-1 

• Working mode: Semi-automatic 

• Beam move stroke 2500mm（Determine polishing length）

• Polishing belt and wheel can be exchanged.

• Polishing motor:4 or 5.5kw  Brand: WANNA

• VFD Brand:zhongchen/DELTA

• Circuit part：Schneide

• Tank diameter:300-3000mm

• Tank length:5000mm

• Tank weight:optional

• Tank shell polishing only

• Polishing tank shell inside and outside

• Get matt,bright and mirror finish

• Efficiency:10-12㎡/h

🌎Stainless steel tank polishing machine designed by XINYIDA Polishing Machine.
🌏Suitable for Tank and Pressure Vessel φ800mm-3000mm inside and outside buffing.
Optional tank rolling table load range: 1-20 tons.
🌏Tank and Pressure Vessel Finishes.
Highly reflective surface obtained with the the combination of different abrasive belts. Minimal grit lines.
Used where product-contact surfaces are critical. RA Range: <0.2.