Some common problems in daily polishing and their corresponding solutions.
The biggest problem encountered in the daily polishing process is "over-polishing", which means that the longer the polishing time, the worse the quality of the mold surface. There are two phenomena of excessive polishing: "orange peel" and "pitting". Over-polishing often occurs in mechanical polishing.
1)Causes of "orange peel" on workpieces
Irregular and ...
Do you know the working principle of the tank and dished end polishing machine?
1)General Introduction of Equipment
The tank, head abrasive belt, and thousand impeller interchangeable grinding heads can polish different workpieces such as the tank and head respectively. Use abrasive belts of different particle sizes for polishing to meet different polishing requirements. GHS dust collector can be installed.
2）Field of applicati...
Do you konw how to better utilize PLC aluminum can external polishing machine?
1)General Introduction of Equipment
When polishing, it is recommended to use the method of synchronous walking of the hemp wheel and the cloth wheel. The grinding heads of the hemp wheel and cloth wheel should be able to adjust the pressing force and a small amount of feed respectively. This polishing machine is set with automatic waxing function...
Do you know how to better use LNG cylinder polishing machine?
1)General Introduction of Equipment
Equipment and conveyor line connection. The gas cylinder enters the loading part of the cylinder polishing machine through the conveyor line. The cylinder section polishing adopts horizontal automatic passing method. The barrel section is driven by a motor directly connected to the reducer to drive the roller to rotate, making the cyli...
